How To Clean Shower Mold

Refrain from ever leaving mold to fester in your shower. Even the smallest of black dots can negatively impact your overall health. Let’s take a look at several effective ways to properly clean and remove any mold from your shower.

How To Clean Mold In Your Shower

Follow the step-by-step guides below to remove any mold growth from your shower.

First, though, you will need the following supplies:

• Spray bottle.
• White vinegar.
• Hydrogen peroxide.
• Scrubbing brush.
• Microfiber towel.

There are a few different cleaning methods for this issue, all outlined below.

Cleaning Shower Mold With White Vinegar

White vinegar is an ideal natural cleaning agent that can be used in a variety of areas around the house. White vinegar works exceptionally well against mold found in the shower.

• Begin by filling the spray bottle up with an equal mixture of white vinegar and warm water.
• Spray the mold growth with this mixture and let it sit between 20 minutes to an hour.
• Use the scrubbing brush to then remove the mold.
• Rinse completely with water.
• To prevent future growth, reapply the solution.
• Let all the areas air dry.

Cleaning Shower Mold With Hydrogen Peroxide

Hydrogen peroxide is especially effective at removing mold due to how it oxidizes the infestation. This causes mold to ultimately break down.

• Fill the spray bottle up with an equal solution of warm water and hydrogen peroxide.
• Spray all the moldy areas with this solution.
• Again, let this sit between 20 minutes to one hour.
• Scrub the areas in order to remove the mold.
• Rinse the areas using warm water.
• Use a clean microfiber towel to dry the areas.

Cleaning Shower Head Mold

Unfortunately, shower heads can be breeding grounds for mold due to the constant moisture and humidity in this section of the shower. Follow these steps to remove the mold.

• Find a plastic bag that is large enough to fit all the way around the shower head.
• Fill this bag with an equal solution of white vinegar and warm water.
• Secure the bag over the shower head, at this time.
• Tie it up with rubber bands, then let the solution sit on the shower head for an hour.
• Remove the bag after the time has passed and rinse the shower head with warm water.
• Dry it off with a clean microfiber towel.

How To Prevent Smells In The Shower

If you’ve noticed an odd smell coming from your shower area, it’s most likely mold growth. Prevent these smells by regularly cleaning and drying the shower area with the use of homemade vinegar sprays.

It’s best to always ensure there is proper ventilation in the bathroom while showering. You can run a fan or open a door for ventilation. This will help keep your bathroom from building up high moisture levels that can result in mold growth.

Native Environmental LLC is a industrial cleaning company located in Phoenix, Arizona offering a full list of industrial cleaning services including mold removal/remediation, asbestos removal/remediation, mercury spill clean up, silo cleaning and more. We can also help with industrial cleaning in Tempe, Tucson, Chandler, Gilbert, Glendale, South Phoenix, Central Phoenix, Scottsdale, Arizona and more.