2025 Asbestos Siding Removal Costs

The cost of removing asbestos siding in 2025 varies based on factors such as the size of the area, ease of access, and regional pricing. On average, homeowners can expect to pay between $1,300 and $3,900 for asbestos siding removal, with an average cost of $2,900.

The size of the area significantly influences the total cost. Asbestos siding removal typically costs between $5 and $12 per square foot. For instance, removing asbestos siding from a 1,000-square-foot area may cost between $4,700 and $11,500.

It’s important to note that these figures are averages, and actual costs can vary based on specific project details and regional differences. Local labor rates and disposal fees may affect the final price. For a more accurate estimate, it’s advisable to consult with licensed asbestos abatement professionals in your area.

Additionally, after the removal of asbestos siding, you’ll need to consider the cost of installing new siding. The replacement cost depends on the type of siding material chosen and can range from $3,000 to $20,000.

Always ensure that asbestos removal is conducted by certified professionals to guarantee safety and compliance with local regulations.

Asbestos Shingles Removal Costs

The cost of removing asbestos shingles varies based on factors such as location, accessibility, and the specific type of shingles. On average, homeowners can expect to pay approximately $8 per square foot for asbestos shingle siding removal. This rate typically includes labor and disposal fees.

For roofing shingles, the removal process is generally more complex and hazardous, leading to higher costs. Prices for removing asbestos roofing shingles range from $50 to $120 per square foot, reflecting the increased difficulty and safety precautions required.

In Arizona, local factors such as labor rates and disposal fees can influence the overall cost. For instance, in the Phoenix area, complete removal of hard-to-access asbestos siding or shingles can cost between $50 and $150 per square foot.

It’s important to note that these figures are averages, and actual costs can vary based on specific project details and regional differences. For a more accurate estimate, it’s advisable to consult with licensed asbestos abatement professionals in your area.

Always ensure that asbestos removal is conducted by certified professionals to guarantee safety and compliance with local regulations.

2025 Asbestos Siding Encapsulation Costs

Encapsulation is a method of managing asbestos siding by sealing it with a specialized material to prevent the release of hazardous fibers. This approach is often more cost-effective than complete removal.

Cost of Encapsulation:

• Per Square Foot: The average cost ranges from $2 to $6 per square foot.
• Total Project: For an entire project, costs can range from $3,000 to $9,000, depending on the size and complexity.

Factors Influencing Cost:

• Area Size: Larger areas will naturally incur higher costs due to the increased amount of materials and labor required.
• Condition of Siding: If the asbestos siding is in good condition, encapsulation is a viable option. However, if the siding is damaged or deteriorating, removal might be necessary, which is more expensive.
• Accessibility: Hard-to-reach areas may increase labor costs.

Considerations:

• Local Regulations: Some regions have specific regulations regarding asbestos management. It’s essential to consult local guidelines to determine if encapsulation is permitted or if removal is required.
• Professional Assessment: Always hire licensed professionals to assess the condition of your asbestos siding and recommend the best course of action.

How To Properly Dispose Of Asbestos Siding

Disposing of asbestos siding requires following strict safety protocols to prevent the release of hazardous fibers. Here’s how to properly dispose of it:

1. Check Local Regulations

• Contact your local environmental or waste management authority to learn about disposal regulations.
• Some areas require special permits or professional abatement services.

2. Wear Proper Protective Gear

• Use a respirator mask (NIOSH-approved N100 or P100).
• Wear disposable coveralls, gloves, and shoe covers.
• Use safety goggles to protect your eyes.

3. Wet the Asbestos Siding

• Lightly mist the siding with water to reduce airborne particles.
• Use a low-pressure sprayer mixed with a few drops of dish soap.

4. Carefully Remove the Siding

• Avoid breaking or cutting the siding to prevent fiber release.
• Remove nails carefully using a pry bar or screwdriver.
• If the siding is damaged, seal the broken areas with duct tape before handling.

5. Double-Bag the Waste

• Place the asbestos siding in 6-mil thick plastic bags or wrap it in plastic sheeting.
• Seal the bags tightly with duct tape.
• Label the bags “Asbestos-Containing Material” as required by law.

6. Transport to an Approved Facility

• Asbestos waste must be taken to an approved landfill or disposal site.
• Call ahead to verify the facility’s acceptance policies and disposal fees.
• Transport the waste in a covered vehicle to prevent exposure.

7. Clean Up Properly

• Do not sweep or vacuum asbestos debris—this can release fibers into the air.
• Use damp rags or HEPA vacuum cleaners for cleanup.
• Dispose of all protective gear used during the process.

8. Professional Assistance (If Needed)

• If the project is large or the siding is in poor condition, hire a licensed asbestos abatement contractor.
• Many areas legally require professional removal for safety compliance.

Hire Asbestos Removal Company

This is your safest bet when dealing with asbestos. It is always better to hire a professional company rather than attempt the job yourself. Professionals will bring the necessary supplies for any removal tasks. These supplies include respirators, suits, shields and water to hold the dust down. You can read all about Native Environmental’s asbestos services right here.

Types Of Asbestos

Asbestos is a group of naturally occurring fibrous minerals known for their heat resistance, durability, and insulating properties. There are six recognized types of asbestos, classified into two groups: Serpentine and Amphibole asbestos.

1. Serpentine Asbestos

This group consists of only one type of asbestos:

• Chrysotile (White Asbestos)
  • Most common type (90-95% of asbestos used in buildings).
  • Curly, flexible fibers.
  • Found in insulation, roofing, brake pads, cement, gaskets, and textiles.
  • Considered less hazardous than amphibole types but still poses serious health risks.

2. Amphibole Asbestos

This group has straight, needle-like fibers that are more brittle and hazardous than chrysotile. It includes:

• Amosite (Brown Asbestos)
  • Found in cement sheets, insulation, roofing, tiles, and pipe insulation.
  • High resistance to heat and chemicals.
  • Considered more hazardous than chrysotile.
• Crocidolite (Blue Asbestos)
  • Extremely thin fibers, making it the most dangerous form.
  • Used in cement, pipe insulation, and shipbuilding.
  • Has the highest risk of causing diseases like mesothelioma.
• Tremolite
  • Not commonly used in commercial products but found in some insulation, paints, and plumbing materials.
  • Can be found as a contaminant in talc and vermiculite.
• Actinolite
  • Rarely used in industrial applications.
  • Can be found in insulation, drywall, and some paints.
• Anthophyllite
  • Least common type.
  • Found in vermiculite, insulation, and some cement products.

Health Risks of Asbestos Exposure

All types of asbestos can cause severe diseases, including:

• Asbestosis (lung scarring from inhaled fibers).
• Lung Cancer (especially in smokers).
• Mesothelioma (a rare and aggressive cancer of the lung lining).

Safe Handling and Removal

If asbestos is suspected in a building, do not disturb it. Always consult a certified asbestos professional for testing and removal.

Native Environmental LLC Provides Industrial Cleaning In Phoenix, Arizona