Does Lysol Kill Mold?

If you notice any mold or mildew growing in your bathroom, it’s crucial kill these agents immediately. Fortunately, Lysol Mold and Mildew Remover can rectify this issue.

Can Lysol Kill Mold?

A damp environment inside a bathroom is a breeding ground for germs. For damp days, especially in highly trafficked areas, your regular spray and clean may simply not be enough.

Lysol Mold and Mildew Remover features a specialized formula to both kill and prevent mold growth.

What Causes Mold?

The first key to identifying mold is knowing what exactly the growth looks like. To be clear, mold essentially grows everywhere. Mold growth comes from tiny spores that float around in the air. Mold will grow in any area that stays between 40-100 degrees. Generally, mold is most common in damp areas of homes or commercial buildings. Mildew is the easiest type of mold to identify. Its black coloring makes it unmistakable.

This substance only grows larger as time goes by, spreading into colonies. Check damp areas, including shower corners and siding for any signs of mildew growth. Don’t be passive when inspecting for mold. Its generally easy to identify but many homeowners may pass it by, assuming it is simply dirt buildup.

Mold enters the home as tiny spores, with moisture required for the spores to grow and spread. Mold growth can occur on the following materials:

• Wood.
• Paint.
• Carpet.
• Ceiling tiles.
• Insulation.
• Wallpaper.
• Sheet rock.

How To Clean Up Mold

To properly clean up mold or mildew, follow these steps:

• Apply Lysol to a pre-cleaned surface and spray until the surface is thoroughly wet.
• Let the cleaner sit for five minutes.
• Allow this to air dry.
• You can repeat the cleaning task at weekly intervals or whenever mold re-appears.

How To Prevent Mold And Mildew Growth

Use the following preventative tips to stop mold and mildew from growing anywhere inside your home.

Constantly Moving Air

In the bathroom, your shower and curtains/doors can get wet and stay wet for long periods of time. This makes them susceptible to mold and mildew growth. To prevent this, keep a squeegee in the shower and try to wipe down the walls after each shower.

If you have vinyl shower curtains, try to toss them in the wash regularly, as long as they are machine washable. If not, try to clean your curtains daily with germ-killing products.

Clean Bathroom Habits

It’s crucial to refrain from leaving used towels on the floor. Doing so encourages mold growth. This can linger in the air and also end up on the next individual to use said towel.

Here are a few quick reminders:

• Hang up towels right after drying off.
• Replace your towel with a fresh one after every three to five uses.

Ditch Carpets And Soft Mats

Hard surfaces are much easier to keep clean than soft mats and carpets. Consider replacing bathroom carpets with laminates or tile. These options make for easier cleaning and germ maintenance.

if you wish to keep your soft bath rug, the suggestion is to make sure it’s laundered as frequently as possible.

DIY Vs Professional Mold Removal

Yes, homeowners will be able to perform small remediation projects. In fact, if the infected area is 10 square feet or less, the EPA says property owners can handle the projects themselves. After the area is inspected by a professional, ask if you will be able to perform the cleanup task yourself.

The first key to identifying mold is knowing what exactly the growth looks like. To be clear, mold essentially grows everywhere. Mold growth comes from tiny spores that float around in the air. Mold will grow in any area that stays between 40-100 degrees. Generally, mold is most common in damp areas of homes or commercial buildings.

When searching for “mold remediation near me,” there’s a reason why Native Environmental LLC stands out above the rest.